<% rstxt.movenext if rstxt.eof then exit for next End if %>
T型过滤器(KST) Y型过滤器(KSY) 半自动冲洗过滤器(KSZQ)
磁过滤器(KCGQ) 蓝式过滤器(KSN) 临时过滤器(KSV)
消气过滤器(KSXQ) 全自动清洗过滤器(KSQ) 双联切换过滤器(KSSL)
过淲器是从流体中分离固体颗粒杂质,提高产品纯度,保护设备(压缩机,泵,仪表等)安全工作的产品。
Filter is a kind of small equipment that eliminates a small amount of rounds from liquid. It can protect normal operation for compressor,pump and other equipment as well as instruments and is also a small equipment to increase product pureness and pureness and purify gas.So it can be widely used in petroleum and chemical imdustry,chemical fiber,medicine.food etc.

主要技术参数
适用的物料有:
一,化工,石油化工生产中的弱腐蚀性物料,如:水,氨,油品,烃类等。
二,化工生产中的腐蚀性物料,如:烧碱,浓稀硫酸,碳酸,醋酸,酯酸等。
三,制冷中的低温物料,如:液甲烷,液氨,液氧和各种冷剂。
四,轻工食品,制药生产中有卫生要求的物料,如:啤酒,饮料,乳制品,粮浆医药用品等。
五,各种特殊工艺的高效过滤器等。

工作温度(℃):碳钢: -30~380℃,不锈钢:-80~450℃
工作压力(MPa):0.6~5.0 MPa
壳体材质: A3,SS304,SS304L,SS316,SS316L,衬PP,H62等.
密封材质:耐油石棉橡胶,丁腈橡胶,聚四氟乙烯
粗过滤滤芯材质:滤框滤网均为不锈钢.
精过滤滤芯材质:钛合金烧结滤芯,不锈钢折叠滤芯,聚四氟折叠滤芯,聚丙烯折叠滤芯,金属纤维烧结管毡,陶瓷.
法兰标准:HG20592-97 PN1.0 当客户需要用GB,SH,HGJ,JB或ANSI,JIS等标准或改变压力等级时,请在订货合同中注明
制造,检测标准:执行GB150标准,或客户指定标准.

Main technical paremeters:
Applicable medium:
1,Weak corrosively medium for petrochemical production such as water,amrnonia,oil hydrocarbon products and etc
2,corrosively mediurn for chemical production such as sodium hydrate ,caustic soda,sulfuric acid,mitric acid,acetic acid,datty acid.
3,Low ternperature medium for refrigeration,the refrigerant such as liquefied methane,liquefied ammonia,oxygen and etc.
4,Industry hygiene medium in leight industry,foodstrff and pharmacy such as beer,drink,beverage dairy products,syrup medical articles for use and etc.
5,For various special behavior high efficiency fine filter

Operating Termperature(℃):CS:-30~380℃, SS: -80~450℃
Operating Pressure(Mpa): 0.6~5.0 Mpa
Body Material: Asbestos.NBR.PTFE
Srtainer Element Material: Sreen Mesh Materialcss
Precision Filter Elernent Material: Sinter Al Alloy Filter element,Fold Stainless Filter element,Fold PTFE Filter element,Fold HPP filter element,Sintered metal Cotton Rayon filter element,Ceramic
Flanges of the valve are in accordance with HG20592-97 PN1.0,WHEN GB,SH,HGJ,JB,ANSI,JIS,If changed,buyer shall illustrate in the contract
Code for manufacturing and inspection:GB150,or specified by buyers.